uPVC Threaded Casing And Filter Pipes

Rukmini uPVC Threaded Casing and Filter Pipes is a product used for mining bore wells and providing clean water from depths. These pipes are manufactured and designed in strict compliance with the industry laid quality standards based on the client’s demand.

Economical: 
Rukmini uPVC Threaded casing and filter pipes are cost-efficient. On top of the best market price, these pipes can easily be installed reducing the installation charges.

Higher well yields
uPVC screen pipes facilitate optimum performance & amp safety by keeping the gravel pack and other foreign substances out.

Durable: 
Extra strong, long life, low maintenance and replacement cost.

Leakproof: 
With close dimensional tolerance and precise design, these pipes are leak proof.

Excellent Chemical Resistance:
Non-corrosive; no concern of fungus and rust.

Low frictional losses: 
The smooth construct of the pipes can filter the water, however, the same does not obstruct the fluency of the liquid allowing the best results.

Quality Water:
uPVC does not impart any colour, odour and taste. Thereby, making them perfect for drinking water.
 

Threaded Casing Pipes (Plain)

Nominal Outside Dia. SHALLOW WELL PLAIN CASING (CS) MEDIUM WELL PLAIN CASING (CM) DEEP WELL PLAIN CASING (CD)
Dia. CM (mm) Wall Thickness (mm) Wall Thickness (mm) Wall Thickness (mm)
Inch mm Min. Max. Min. Max. Min. Max. Min. Max.
1.25 35 42 42.5 - - 3.5 4.1 - -
1.5 40 48 48.2 - - 3.5 4.1 - -
2 50 60 60.2 - - 4.0 4.6 - -
3 80 88 88.3 - - 4.0 4.6 - -
4 100 113 113.3 - - 5.0 5.7 7.0 7.9
4.5 115 125 125.3 - - 5.0 5.7 7.5 8.5
5 125 140 140.0 - - 6.5 7.4 8.0 9.0
6 150 165 165.4 5.7 6.5 7.5 8.5 9.5 10.7
7 175 200 200.5 7.0 7.8 8.8 9.8 11.8 13.6
8 200 225 225.5 7.6 8.8 10.0 11.2 13.0 14.8
10 250 280 280.5 9.6 11.0 12.5 14.0 16.0 17.6
12 300 330 330.6 11.2 13.3 14.5 16.2 19.0 21.0

 

Dimensions of Well Screen Pipes With Ribs

(Clause 7.1.1)

All dimensions in millimetres

Si.No. Nominal Diameter (DN) Means Outer Diameter of Pipe Outer Diameter any any Point Means Outer Diameter Over Connection Wall Thickness (under Ribs) Means Outer Diameter Over Connection Wall Thickness (under Ribs)
RMS RDS
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
i. 100 117.0 117.3 116.8 117.4 124.0 5.0 5.7 129.0 7.0 7.9
ii. 115 129.0 129.3 128.8 129.4 136.0 5.0 5.7 141.0 7.5 8.5
iii. 125 144.0 144.3 143.7 144.5 154.0 6.5 7.3 156.0 8.0 9.0
iv. 150 169.0 169.4 168.6 169.6 182.0 7.5 8.5 184.0 9.5 10.7
v. 175 204.0 204.5 203.6 204.6 219.0 8.8 9.8 221.0 11.8 13.6
vi. 200 229.0 229.5 228.5 229.8 247.0 10.0 11.2 251.0 13.0 14.8
vii. 250 284.0 284.5 283.4 284.8 302.0 12.5 14.0 309.0 16.0 17.6
viii. 300 334.0 334.6 333.3 335.0 21.0 21.0 21.0 21.0 21.0 21.0